تحلیل و طراحی پلاستیک سازههای فولادی
مرتضی چهاردولی ، سید احسان آقاکوچکی حسینی
تحلیل و طراحی پلاستیک سازههای فولادی
مرتضی چهاردولی ، سید احسان آقاکوچکی حسینی
USING MR DAMPERS FOR MITIGATING THE SEISMIC RESPONSE OF NONLINEAR HYSTERETIC STRUCTURES
ششمین کنفرانس بین المللی زلزله شناسی و مهندسی زلزله، تهران، پژوهشگاه بین المللی زلزله شناسی و مهندسی زلزله
engineering department university of mohaghegh ardabili, ardabil, iran
:S.E Hosseini
engineering department university of mohaghegh ardabili, ardabil, iran
Abstract:
Magnetorheological MR damper as a promising semi active control mechanism has reseived significant attention in recent years. In most of the previous researches on the application of semi-active systems the main focus has been dedicated to develop algorithms and assessment of the effeciency of control mechanisms on linear structures and the researches dealing with nonlinear structures have been very limited. in this paper the application of MR damper for mitigating the response of seismically excited nonlinear hysteretic structure has been sturdied.
Key Words:
structural control, semi active control , MR damper , nonlinear and hysteretic behavior , clipped optimal control.
Evaluation of Factors Affecting MR Damper Performance in Seismic Response Reduction of Structures
Europen Journal of Scientific Reasearch
Hossein Bakhshi and Sayed Ehsan Hosseini
Abstract:
Magnetorheological (MR) dampers classified as controllable fluid devices have demonstrated a great deal of promise for reducing seismic response of structures in prior studies. Since the efficiency of this device in reducing seismic response of structures depends highly on the manner in which the design parameters are selected, this paper focuses on detecting important and affecting parameters in performance of this control mechanism which can be practically selected in order to result in an optimal design. For this purpose the optimal parameters of MR damper and weighting matrices of control design have been determined based on minimization of structural responses. A semi-active design is developed in which an MR damper is applied to reduce the structural responses of the considered structure in the numerical simulation. Control input determination is based on a clipped-optimal control algorithm which employs absolute acceleration feedback to control linear structures subjected to earthquake for different values of design parameters and input earthquake characteristics. Results obtained from numerical studies demonstrated that maximum voltage applied to the MR damper, weighting matrices, clipped-optimal control algorithm and also frequency content of the design earthquake are among affecting parameters in MR damper efficiency that should be selected appropriately in practical applications.
Keywords: Control of structures, semi-active control, MR damper, clipped-optimal control
پارامترهای تاثیرگذاردرعملکرد میراگرهای MR درکاهش پاسخ لرزه ای سازه ها
کنفرانس زلزله، سازه و روشهای محاسباتی، کرمان، جهاد دانشگاهی استان کرمان
نویسندگان:
[ محتشم محبی ] - استادیاردانشگاه محقق اردبیلی
[ سیداحسان آقاکوچکی حسینی ] - کارشناسی ارشد مهندسی زلزله
خلاصه مقاله:
میراگرمگنتورئولوژیک MR یکی ازموثرترین ابزار کنترل نیمه فعال برای کاهش پاسخ لرزه ای سازه ها می باشد که درسالهای اخیر توجه زیادی را به خود معطوف نموده است از انجایی که کارایی این میراگر درکاهش پاسخ لرزه ای سازه ها وابسته به نحوه انتخاب متغیرهای طراحی می باشد لذا دراین مقاله هدف شناسایی پارامترهای مهم و تاثیر گذار درعملکرد این مکانیزم کنترلی می باشد بدین منظور برای سازه های با رفتارخطی که تحت اثر زلزله قرارگرفته اند با استفاده از الگوریتم CLIpped -optimal control با پسخور شتاب به ازای مقادیر مختلف برای متغیرهای طراحی و مشخصات زلزله ورودی به طراحی میراگر mr پرداخته شده است نتایج بدست ام ده از مطالعات عددی نشان میدهد که ولتاژ ماکزیمم و ظرفیت میراگر ماتریسهای وزنی تابع عملکرد الگوریتم کنترل نیمه فعال و محتوای فرکانسی زلزله طراحی از عوامل تاثیر گذار درکارایی میراگر MR می باشد که درکاربردهای عملی بایستی به نحومناسبی انتخاب شود.
کلمات کلیدی:
کنترل سازه ها، کنترل نیمه فعال، میراگر MR، الگوریتم Clipped-optimal control